Washington State company Moto Design Garage has successfully transformed a 1958 Parilla Greyhound 150 moped into an electric marvel, incorporating 3D printing elements into the design.
To begin the conversion, the bike was disassembled and cleaned, providing a blank canvas for the modifications. To power the machine, the team opted for a QS260 V3 hub motor at 3000w and Votol EM150 controller. With a 72v 35Ah battery pack, the bike has a range of approximately 35 miles, depending on riding conditions. The bike has a three-speed setup which is optimized for increased range, but the sport mode was a favorite due to its instant torque and output.
To accommodate the motor the team fabricated a new swing arm, mounted the controller to the main frame, and 3D printed a large battery box (as seen in the picture above). The box can be slid in and out for ease of access, while charging is done on-board. The motorcycle has also received LED lighting, turn signals, and a hydraulic 4-piston front end setup.
Moto Design Garage usually focuses on vintage motorcycles but has recently turned its attention to electric vehicle (EV) conversions, primarily for smaller-framed machines such as Honda XL125s, CLs, and Cubs.
The company believes that the time is right for embracing EV technology, and while they still enjoy working on classic bikes, their focus will shift towards electric conversions as they continue to grow.
You can check out the work of Moto Design Garage over at this link.
Come and let us know your thoughts on our Facebook, Twitter, and LinkedIn pages, and don’t forget to sign up for our weekly additive manufacturing newsletter to get all the latest stories delivered right to your inbox.