3D Printing
News Videos Newsletter Contact us
Home / News / Introducing the DIY Repairable AirPods Pro Case
revopoint

Introducing the DIY Repairable AirPods Pro Case

July 27, 2023

Swiss modder Ken Pillonel has unveiled his 3D printed solution to a problem that many Apple-fans face: the problem of non-user repairable hardware, specifically with regards to Apple’s AirPods Pro cases.

Recognizing the common issue of these cases eventually failing and becoming non-repairable, Pillonel took matters into his own hands to create a solution – custom 3D printed AirPods Pro case that is not only user-repairable but freely accessible to all.

Introducing the DIY Repairable AirPods Pro Case
Begone, non-repairable woes! (Image Credit: Ken Pillonel)

Pillonel invested countless hours mastering modeling software and meticulously designing every single part of the case. The curved sections, in particular, presented a challenge, as accurately 2D scanning them proved difficult. Nonetheless, Pillonel’s determination prevailed, and he successfully recreated the design for others to benefit from.

The real game-changer was the integration of affordable spring-loaded contact pins to ensure the AirPods could be charged even if the original pins went bad. By allowing users to repair their cases instead of replacing them entirely, Pillonel’s innovation not only saves money but also significantly reduces electronic waste, benefiting the environment.

“Considering the enormous number of AirPods Pro units sold, even a small percentage being repairable and extending their lifespan can make a significant impact in reducing electronic waste,” said Pillonel.

“I am thrilled to make these repairable designs available to the public at no cost, encouraging individuals and manufacturers alike to prioritize repairability in their product development. Together, we can work towards a circular economy that not only minimizes electronic waste but also fosters a culture of conscious consumption and responsible tech innovation.”

This project sets a great example of how individuals can positively impact the tech industry. Pillonel’s dedication to innovation and environmental responsibility challenges major companies to consider user-repairability in their product designs.

So if you are an AirPods Pro user, and you have had enough of the cases breaking, then head on over to this video link and look at the pinned comment for information on how to get your hands on the files to print your own.

Come and let us know your thoughts on our Facebook, Twitter, and LinkedIn pages, and don’t forget to sign up for our weekly additive manufacturing newsletter to get all the latest stories delivered right to your inbox.

Share:
WhatsApp Twitter Facebook LinkedIn Buffer Reddit E-mail
About the author | Phillip Keane
Phillip is an aerospace engineer from UK. He is a graduate of Coventry University (UK), International Space University (France) and Nanyang Technological University (Singapore), where he studied Advanced Manufacturing at the Singapore Centre for 3D Printing.
Join our newsletter

Our newsletter is free & you can unsubscribe any time.

Latest posts

Mandrill’s Custom Bonneville T120 Street Tracker Reimagines Classic Design

Chinese custom shop Mandrill Garage has transformed a Triumph Bonneville T120 into a street tracker that blends racing aesthetics with practical functionality. The... read more »

Automotive
Mandrill's Custom Bonneville T120 Street Tracker Reimagines Classic Design

Design Lab Invents Modular, Fully 3D Printed Wheelchair for Kids

MakeGood NOLA has developed a modular, fully 3D-printed wheelchair for children ages 2 to 8. The New Orleans-based adaptive design lab created the... read more »

News

Donkervoort’s New P24 RS Supercar Uses 3D-Printed Intercoolers

Conflux Technology, an Australian company specializing in heat exchangers, has created a 3D-printed intercooler for Donkervoort's upcoming P24 RS supercar. The metal 3D-printed... read more »

Automotive
Donkervoort's New P24 RS Supercar Uses 3D-Printed Intercoolers

3D Printed Concrete Bus Stop Creates Sculptural Shelter in Slovakia

A new 3D-printed concrete bus stop has been installed in Bratislava, Slovakia, as part of urban development in the growing Čerešne district. The... read more »

Construction
3D Printed Concrete Bus Stop Creates Sculptural Shelter in Slovakia

Reducing Porosity Key to Stronger Large-Scale 3D Prints

Oak Ridge National Laboratory (ORNL) researchers have created a vacuum-assisted extrusion technique that reduces internal porosity in large-scale 3D-printed polymer parts by up... read more »

News

Engineer Creates 3D Printed Trekking Pole Attachment to Combat Trail Litter

Aerospace engineer John McShane has developed "CleanTrek," a 3D-printed attachment for hiking poles designed to collect litter on trails. Inspired by a trash-strewn... read more »

Environmental
Engineer Creates 3D Printed Trekking Pole Attachment to Combat Trail Litter

New $9M Illinois Lab to 3D Print Large Vehicle Parts for US Military

The University of Illinois Urbana-Champaign is establishing a new research center focused on developing additive manufacturing methods for large metal parts. The center... read more »

Military
New $9M Illinois Lab to 3D Print Large Vehicle Parts for US Military

University of Florida Students Develop Simple Spool to Address 3D Printing Waste

A team of University of Florida mechanical engineering students has created a device aimed at reducing plastic waste in 3D printing. The device,... read more »

Environmental
University of Florida Students Develop Simple Spool to Address 3D Printing Waste

Cadillac CELESTIQ Features Over 100 3D Printed Parts in Luxury Hand-Built Design

General Motors has expanded its use of additive manufacturing beyond prototyping to include functional parts in production vehicles. The Cadillac CELESTIQ, a hand-built... read more »

Automotive

Social

  • Facebook Facebook 3D Printing
  • Linkedin Linkedin 3D Printing
Join our newsletter

Our newsletter is free & you can unsubscribe any time.

Featured Industries

  • Automotive
  • Aerospace
  • Construction
  • Dental
  • Environmental
  • Electronics
  • Fashion
  • Medical
  • Military
  • Snapmaker Artisan Premium 3-in-1

    • - Print size: 400 x 400 x 400 mm
    • - comes with enclosure
    More details »
    $2,999.00 Snapmaker
    Buy Now
  • QIDI Tech Q1 Pro

    • - Print size: 245 x 245 x 245 mm
    • - 600mm/s max speed
    More details »
    $449.00 QIDI Store
    Buy Now
  • QIDI Plus4

    • - Print size: 305 x 305 x 280 mm
    • - print temperature of 370°C
    More details »
    $799.00 QIDI Store
    Buy Now
  • QIDI Tech X-Max 3

    • - Print size: 325 x 325 x 315 mm
    • - fully enclosed
    More details »
    $799.00 QIDI Store
    Buy Now

Company Information

  • What is 3D Printing?
  • Contact us
  • Join our mailing list
  • Advertise with us
  • Media Kit
  • Nederland 3D Printing

Blog

  • Latest News
  • Use Cases
  • Reviews
  • 3D Printers
  • 3D Printing Metal

Featured Reviews

  • Anycubic Photon Mono M5s
  • Creality Ender 5 S1
  • The Mole 3D Scanner
  • Flashforge Creator 3 Pro

Featured Industries

  • Automotive
  • Aerospace
  • Construction
  • Dental
  • Environmental
  • Electronics
  • Medical
  • Military
  • Fashion
  • Art
2025 — Strikwerda en Dehue
  • Home
  • Join our mailing list
  • Contact us
Blog
  • Latest News
  • Use Cases
  • Reviews
  • 3D Printers
  • 3D Printing Metal
Featured Industries
  • Automotive
  • Aerospace
  • Construction
  • Dental
  • Environmental
  • Electronics
  • Medical
  • Military
  • Fashion
  • Art
Company Information
  • What is 3D Printing?
  • Contact us
  • Join our mailing list
  • Advertise with us
  • Media Kit
  • Nederland 3D Printing