3D Printing
News Videos Newsletter Contact us
Home / News / Lost Van Gogh Recovered with 3D Printing
revopoint

Lost Van Gogh Recovered with 3D Printing

September 6, 2022

Many great artists have gone through rough financial times historically, and on occasion, artists have been forced to paint over previous works in order to save on materials.

This was the case with Vincent van Gogh, who 135 years ago, had decided to paint over a previous work with a picture of some flowers.

The picture hidden beneath the flowers was of two wrestlers, and was known to have existed historically via the artist’s own writings.

A team of researchers with some experience of using AI and 3D printing to restore such lost masterpieces has turned their attention to the Van Gogh painting and has successfully replicated some approximations of the original. We say “approximation” because there is no real point of reference to confirm, but more on that later.

You can see the restored image below.

Wrestlers
“The Two Wrestlers” – artwork restored with 3D printing (Image credit: UCL)

The image was first discovered back in 2012 when researchers at the University of Antwerp were attempting to authenticate the aforementioned flower painting, known as “Still Life with Meadow Flowers and Roses”. During the investigation into the painting’s authenticity, the researchers used X-rays to look at the lower layers of paint.

This is where they discovered the painting of the wrestlers (now dubbed “The Two Wrestlers”) concealed beneath, and displaying characteristics of Van Gogh’s work.

You can see “Still Life with Meadow Flowers and Roses” in the image below.

flowers
The original artwork concealing the wrestlers (Image credit: UCL)

And the following image shows the flowers painting rotated 90 degrees clockwise when imaged with X-rays. The Two Wrestlers, once thought lost forever, are seen again.

X-ray
X-ray of “Still Life with Meadow Flowers and Roses” with wrestlers underneath (Image credit: UCL)

But seeing is one thing. How were they restored?

PhD researchers Anthony Bourached (UCL Queen Square Institute of Neurology) and George Cann (UCL Space and Climate Physics) used a series of custom algorithms to identify edges in the hidden painting. Using a neural network trained in the styles of Van Gogh’s work, they were able to use the AI to recreate the approximation.

Is it a realistic interpretation? We may never know.

“How much it is like the original painting is impossible to tell at this point because the information doesn’t exist. I think it’s very convincing – by far the best guess we can get with current technology.” said Bourached.

Once the painting had been digitally resurrected, it was reproduced on a 3D printer.

It is now sitting on display at the FOCUS Art Fair at the Louvre along with other resurrected masterpieces from the researchers. Other works include restored images by Leonardo Da Vinci and Amedeo Modigliani.

Once such recovered artwork was found under Picasso’s “The Blind Man’s Meal” which was covered over by the artist himself.

The piece, a painting of a nude woman, was thought to be lost to the ages but was restored by the researchers and their company Oxia Palus, who specialize in bringing back lost artwork with various imaging technologies.

You can read our previous article on how the Picasso was restored at the link below.

Related Story
Hidden Picasso Recreated with 3D Printing
Share:
WhatsApp Twitter Facebook LinkedIn Buffer Reddit E-mail
About the author | Phillip Keane
Phillip is an aerospace engineer from UK. He is a graduate of Coventry University (UK), International Space University (France) and Nanyang Technological University (Singapore), where he studied Advanced Manufacturing at the Singapore Centre for 3D Printing.
Join our newsletter

Our newsletter is free & you can unsubscribe any time.

Latest posts

UW-Madison Engineers Develop Enhanced Heat Exchanger Using 3D Printing

Engineers at the University of Wisconsin-Madison have created a heat exchanger with complex internal channels that outperforms traditional designs. The team used topology... read more »

3D Printing Metal
UW-Madison Engineers Develop Enhanced Heat Exchanger Using 3D Printing

U.S. Army Soldiers Apply 3D Printing Training to Solve Field Equipment Issues

Two U.S. Army soldiers recently used skills learned at the Naval Aviation School for Additive Manufacturing (NASAM) to produce critical parts during deployment.... read more »

Military
U.S. Army Soldiers Apply 3D Printing Training to Solve Field Equipment Issues

Architect Wins Dezeen Competition with Wave-like 3D Printed Installation

Architect Arthur Mamou-Mani has won the Shaping Water Competition with his installation "Harmonic Tides," which will be built at Clerkenwell Design Week this... read more »

Construction
Architect Wins Competition with Wave-like 3D Printed Installation

Philips Debuts 3D Printable Components for Product Repair

Philips has introduced "Philips Fixables," a new initiative offering free 3D printable replacement components for select products. The program currently features just one... read more »

News
Philips Debuts 3D Printable Components for Product Repair

Caltech Team Advances 3D Printing Inside Living Tissue Using Sound Waves

Caltech researchers have developed a new method for 3D printing polymers inside living organisms. The technique, called deep tissue in vivo sound printing... read more »

Bioprinting
Caltech Team Advances 3D Printing Inside Living Tissue Using Sound Waves

AIRSYS Invests $40 Million in New HQ with World’s Largest Liquid Cooling 3D Printing Factory

AIRSYS Cooling Technologies has started construction on its new global headquarters in Woodruff, South Carolina. The $40-million facility will span over 260,000 square... read more »

News
AIRSYS Invests $40 Million in New HQ with World's Largest Liquid Cooling 3D Printing Factory

Mandrill’s Custom Bonneville T120 Street Tracker Reimagines Classic Design

Chinese custom shop Mandrill Garage has transformed a Triumph Bonneville T120 into a street tracker that blends racing aesthetics with practical functionality. The... read more »

Automotive
Mandrill's Custom Bonneville T120 Street Tracker Reimagines Classic Design

Design Lab Invents Modular, Fully 3D Printed Wheelchair for Kids

MakeGood NOLA has developed a modular, fully 3D-printed wheelchair for children ages 2 to 8. The New Orleans-based adaptive design lab created the... read more »

News

Donkervoort’s New P24 RS Supercar Uses 3D-Printed Intercoolers

Conflux Technology, an Australian company specializing in heat exchangers, has created a 3D-printed intercooler for Donkervoort's upcoming P24 RS supercar. The metal 3D-printed... read more »

Automotive
Donkervoort's New P24 RS Supercar Uses 3D-Printed Intercoolers

3D Printed Concrete Bus Stop Creates Sculptural Shelter in Slovakia

A new 3D-printed concrete bus stop has been installed in Bratislava, Slovakia, as part of urban development in the growing Čerešne district. The... read more »

Construction
3D Printed Concrete Bus Stop Creates Sculptural Shelter in Slovakia

Social

  • Facebook Facebook 3D Printing
  • Linkedin Linkedin 3D Printing
Join our newsletter

Our newsletter is free & you can unsubscribe any time.

Featured Industries

  • Automotive
  • Aerospace
  • Construction
  • Dental
  • Environmental
  • Electronics
  • Fashion
  • Medical
  • Military
  • Snapmaker Artisan Premium 3-in-1

    • - Print size: 400 x 400 x 400 mm
    • - comes with enclosure
    More details »
    $2,999.00 Snapmaker
    Buy Now
  • QIDI Tech Q1 Pro

    • - Print size: 245 x 245 x 245 mm
    • - 600mm/s max speed
    More details »
    $449.00 QIDI Store
    Buy Now
  • QIDI Tech X-Max 3

    • - Print size: 325 x 325 x 315 mm
    • - fully enclosed
    More details »
    $799.00 QIDI Store
    Buy Now
  • QIDI Plus4

    • - Print size: 305 x 305 x 280 mm
    • - print temperature of 370°C
    More details »
    $799.00 QIDI Store
    Buy Now

Company Information

  • What is 3D Printing?
  • Contact us
  • Join our mailing list
  • Advertise with us
  • Media Kit
  • Nederland 3D Printing

Blog

  • Latest News
  • Use Cases
  • Reviews
  • 3D Printers
  • 3D Printing Metal

Featured Reviews

  • Anycubic Photon Mono M5s
  • Creality Ender 5 S1
  • The Mole 3D Scanner
  • Flashforge Creator 3 Pro

Featured Industries

  • Automotive
  • Aerospace
  • Construction
  • Dental
  • Environmental
  • Electronics
  • Medical
  • Military
  • Fashion
  • Art
2025 — Strikwerda en Dehue
  • Home
  • Join our mailing list
  • Contact us
Blog
  • Latest News
  • Use Cases
  • Reviews
  • 3D Printers
  • 3D Printing Metal
Featured Industries
  • Automotive
  • Aerospace
  • Construction
  • Dental
  • Environmental
  • Electronics
  • Medical
  • Military
  • Fashion
  • Art
Company Information
  • What is 3D Printing?
  • Contact us
  • Join our mailing list
  • Advertise with us
  • Media Kit
  • Nederland 3D Printing