Developed specifically for Bambu machines’ high-speed profiles, running at twice the default speed of standard PETG while eliminating oozing and clumping above 200mm/s. Matte finish hides ringing artifacts at speed and RFID chip enables automatic parameter detection on AMS-equipped machines.
Tech specs
Material
PETG (high-flow formulation)
Nozzle temperature
240 to 270°C (higher end for max speed)
Bed temperature
70 to 80°C
Max print speed
2x standard PETG (200 to 300mm/s achievable)
Finish
Matte (hides layer lines and ringing at high speed)
Pre-print drying
65 to 75°C for 8 to 12 hours (more moisture-sensitive than standard PETG)
