@TeachingTech shows you how to tune support material settings across a range of slicers, as well as ways to apply support more efficiently
Latest posts
Nike Air Works Adds 3D Printed Slip-On from LA Creative Masyn
Masyn's black slip-on with a glowing red Air unit is the fourth 3D printed Air Max to come out of Nike's Air Works... read more »
Czech Designer Brings Ceramic Clay Printing to Maker Faire Brno
Jan Vítek of Brno University of Technology will teach ceramic clay extrusion at Maker Faire Brno, where soft clay still needs craft during... read more »
NormaCore Open-Sources a Fully 3D-Printed Robotic Desk Lamp
NormaCore's open-source Lamp is a fully printed five-servo desk robot that moves with personality and costs about $140 to $160 to build.
Dutch Zoo Fits a Hornbill with Titanium Printed Beak
Artis Zoo, Utrecht University, UMC Utrecht and Amnovis restored both halves of a southern ground hornbill beak with titanium prostheses.
ORNL Wins Composites Award for 3D-Printed Water-Soluble Mandrels
ORNL and collaborators earned a 2026 ACE Award for 3D-printed water-soluble mandrels that make linerless composite gas tanks.
Aerotex Certifies a Printed Water Scoop for the CL-415
Aerotex and Levy's Machine Works certified a printed water scoop for the CL-415 so crews can replace a worn casting without a production-batch... read more »
Formlabs Launches Form Studio 1 Resin Printer From $699
Formlabs opens orders for the enclosed Form Studio 1 resin printer at $699, with shipping from 16 November and six new Alpha Resins... read more »
Rowan Engineers Monitor 3D-Printed Concrete by Analyzing Images in Reverse
Rowan engineers start from the finished print and analyze images backward to see how lower layers of 3D-printed concrete deform under new ones.
Protecting Long 3D Prints From Power Failures: Do You Need a UPS or Voltage Stabilizer?
A two-second outage can end a 40-hour print. Built-in power-loss recovery, a UPS and a voltage stabilizer each deal with a different part... read more »
Flashforge CJ270: Desktop Full-Color Material Jetting, Explained
The Flashforge CJ270 is a desktop full-color 3D printer that uses MJP, or MultiJet Printing, the inkjet-and-UV process behind the PolyJet and ProJet... read more »
