Nikon SLM Solutions has launched MACHX, a family of mid-size metal 3D printers built to turn out more everyday production parts per square meter.

The company’s pitch starts with volume. Most of the parts the industry makes sit in the middle of the size range, and MACHX is aimed at the factories that need to make many more of them. Like the company’s NXG machines, it uses selective laser melting. In this form of laser powder bed fusion (LPBF), lasers melt fine metal powder layer by layer into solid parts. Instead of shrinking the flagship, Nikon SLM built MACHX for the mid-size segment to the same standard.
One platform comes in three sizes. The MACHX 450 builds parts up to 450 x 450 x 450 mm. Its 450C version stretches to 450 x 600 x 450 mm, while the 450E reaches 1000 mm in height. Laser power goes up to 8 kW, either as eight 1 kW lasers or as four 2 kW lasers with beam shaping. Beam shaping offers beam sizes from 80 µm to 760 µm. Because MACHX comes in several laser configurations, users can pick the setup with the strongest business case for each material, using optics developed with Nikon’s optical engineers. Higher power can lower the cost per part for aluminum, titanium and some nickel alloys.
Much of the design targets “lights-out” production, meaning machines that keep running without an operator. With the optional internal loading, preheating and cooling stations, MACHX swaps build plates and starts the next job in as little as 25 minutes. One automated cylinder exchange can keep production going through a weekend. Because powder recovery, sieving and filtration are built into the machine, it also needs less surrounding equipment on the factory floor.
Quality control is meant to keep pace with that speed. A gas flow system clears spatter and fumes across the whole build plate, and thermal conditioning gives every part the same heat history to reduce stress and distortion. Fringe projection scans each powder layer in 3D to catch recoating problems as they happen, while optional optical tomography watches the melting process layer by layer. “The measure is not how fast one job runs,” Nikon SLM Solutions says in its launch video. “It is how much good production you get from every square meter, every week.”
Customers can start with one system and scale to a fleet on the same factory floor. Nikon SLM Solutions is presenting MACHX at Formnext 2026 in Frankfurt, in Hall 12.0 at booth D119, as flagged in our Formnext 2026 preview.








