3D Systems has unveiled the MJP 300, a 3D printer that builds plastic parts with an inkjet process, in layers as thin as 16 microns.

The printer is the latest member of 3D Systems’ MultiJet (MJP) family, a form of material jetting that has been around since 1996. Much like an office inkjet printer, MJP deposits tiny droplets of liquid plastic and a wax support material, building parts one thin layer at a time. The new machine is aimed at faster and easier production of plastic parts. It should not be confused with the MJP 300W Plus, the company’s wax printer for jewelry casting patterns.
The biggest change is in the build modes. HD and UHD print 32-micron layers, while the new XHD mode prints 16-micron layers at 1600 x 900 dpi for sharp threads and smooth curves. In addition, the translucent, castable Crystal material gains a very high-speed HD mode. Parts can fill the full 294 x 211 x 144 mm build area. Alternatively, the printer can split that area into three lanes, so small or tall parts can be grouped for faster runs.
Day-to-day handling has been simplified as well. The material drawer holds two cartridges of each material, and the printer switches automatically mid-build when one runs empty. Afterwards, the wax supports are removed in the bench-top MJP EasyClean System, which uses a bath and a rinse instead of manual scrubbing or a waterjet. For secure settings, the MJP 300 adds upgraded electronics, enhanced cybersecurity and the AddiTrak fleet management software. It also supports .finite, a digital rights management (DRM) tool in 3D Sprint that limits how many prints specific workstations can make from a file.

“The MJP 300 represents a new generation in multijet 3D printing,” said Martin Johnson, Vice President, Product & Technical Fellow at 3D Systems. “Updated electronics and software provide a new level of accuracy, surface finish, ease-of-use and security for our customers with a platform that can scale.”
At launch, the printer supports five VisiJet acrylate materials, with more to follow. The MJP 300 is on display at Formnext 2026 in Frankfurt, in Hall 11.0 at booth D11, and will be available to purchase in the first quarter of 2027. Alongside it, 3D Systems released TSR (Transport-Sieve-Reload), a mobile module which recovers, sieves and reloads metal powder for its DMP Flex 350 printers under inert gas. TSR uses powder handling technology from Russell Finex, and a single unit can serve several printers.
Source: 3D Systems, MJP 300 product page









