EOS has unveiled HELIOR, a large plastic-powder 3D printer built to run around the clock and lower the cost of each part.

The machine uses selective laser sintering (SLS), in which a laser fuses thin layers of plastic powder into solid parts. Because the loose powder supports the parts as they grow, many of them can be packed into one build, which suits contract manufacturers producing in volume. For those companies, margins depend on how many good parts come out of each machine every day. HELIOR builds on an EOS platform that has run for more than 15 years at many of the world’s leading contract manufacturers.
The new features are aimed at output. Three 70W lasers share the work through dynamic load balancing across a 700 x 380 x 580 mm build volume, one of the largest for SLS. EOS rates HELIOR at up to 80% higher throughput, or 154 liters at 10% packing density in a 24-hour cycle. A first-of-its-kind adjustable roller recoater, which spreads each powder layer, works with geometry-aware laser settings to leave a less dense powder cake. Since that block of unused powder is easier to clear away, post-processing effort can drop by up to 80%.
“Whether manufacturing one part or one million, margins matter,” said Joachim Zettler, chief technology officer at EOS. “EOS HELIOR improves the economics of the entire production workflow, supporting a full week of build jobs and more than 1,000 liters of production before maintenance operations.”
Before launch, five contract manufacturers tested the machine in real production, namely FKM Additive Manufacturing, Prototal Group, Materialise, Shapeways and Formrise. “We can complete a full build job every day and achieve significantly better machine utilization,” said Matthias Henkel, managing director of FKM Additive Manufacturing. “This simplifies production planning and has an immediate positive impact on profitability.” In the US, contract manufacturer Prototek has signed on as the first North American customer to expand its large-format SLS capacity as customers move from prototypes to production.
HELIOR launches with validated settings for PA 2200 and PA 2220 HighReuse powders, and more materials will be qualified based on customer requests. It can run as a standalone machine or in a fully integrated production cell, which can include closed powder feeding and automated unpacking from AM Solutions. The machine becomes commercially available in December 2026 and is on show at Formnext 2026 in Frankfurt, in Hall 12.0 at booth D71.
Source: EOS











