Polymaker has launched G-Flex PETG, an elastic filament made from a blend of PETG and TPU that the company says prints like PETG at PLA-like speeds while producing parts that bend and absorb a knock instead of snapping.
Anyone who prints functional parts has lost a few to the same failures: a thin tab that breaks off with the supports, a screw that splits the layer lines. Flexible materials such as TPU survive that treatment, but they tend to print slowly and struggle with fine detail. G-Flex is aimed at the space in between. It feeds like a rigid filament, according to Polymaker, and the finished part has more give than standard PETG.

On the printing side, Polymaker lists speeds of up to 300 mm/s and a volumetric flow of up to 24 mm³/s, with the nozzle at 230 to 240 °C and a PEI bed at 70 °C. Its advice is to start from a PLA or PLA Silk slicer profile. Polymaker says it has tested the filament with Bambu Lab’s AMS and AMS 2 Pro and Creality’s CFS, and supports can be printed in the same material or in ordinary PLA.
The durability claim rests on unnotched Charpy impact testing to ISO 179-1, in which Polymaker reports that every specimen recorded “No Break” in both the XY and Z directions. Z is the direction across the layers, where printed parts usually give up first. Polymaker adds its own caveats: a test result is no guarantee for a given part, and at Shore 65D the material sits between PETG and TPU, so soft, highly flexible parts are still a job for TPU. A press release that says where its product is the wrong choice is rarer than it should be.
“We built G-Flex PETG for the people who are tired of watching good prints snap,” said Maarten Bosters, product marketing manager at Polymaker. “It gives makers PETG-style printing ease with the impact resistance they’ve only been able to get from much harder-to-print materials such as TPU.”
For toys and classroom models, the company says the filament is VOC verified for low-emission printing and complies with EN 71-3, the toy safety standard on the migration of certain elements. It notes that EN 71-3 is a test standard and not a certification, that finished toys remain the maker’s responsibility, and that the material is not intended for mouth or food contact.
G-Flex PETG ships as a semi-matte 1.75 mm filament in black, white, gray, red, blue and yellow, with four more colors to follow, at a planned price of $21.99 or €21.99 per 1 kg spool. It has its global launch this week at Formnext in Frankfurt, November 17 to 20, where Polymaker is also showing its CymphoniK pellet color mixing system. Print presets and data sheets are on the G-Flex PETG product page.
Source: polymaker.com










