Raise3D has raised the build height of its RMS220 SLS 3D printer to 450 mm with a free software and firmware update.

In selective laser sintering (SLS), a laser fuses thin layers of polymer powder into solid parts. The loose powder supports each part, so users can stack many parts on top of each other in one build. Until now, the RMS220 offered a 220 x 220 mm footprint with 350 mm of height. Raise3D also mentioned the update when it introduced its T450 and T700 large-format printers.
The new 450 mm Z axis brings the build size to 220 x 220 x 450 mm. Build volume therefore grows from 16.9 L to 21.8 L, almost 30% more capacity. Notably, the change comes entirely through software and firmware, which means no extra hardware, installation or modifications. It is free for all existing RMS220 systems and rolled out on November 17. Owners can download it from Raise3D’s website or contact the company.

The extra height matters first for large parts. Many tall parts no longer need to be split into segments and joined again. That removes assembly work and avoids weak points at bonded joints, while fewer seams also improve the surface. Raise3D points to automotive, medical and industrial equipment as target fields. To show this, it printed a 450 mm tall car light cover in one piece from PA NEXT, a new polyamide powder.

For small parts, the gain is throughput. Stacking more parts in each job keeps the machine better used, so the cost per part drops. In typical small-batch production, Raise3D expects throughput to rise by 25% to 30%.

Print quality also has to hold up across the full height. For that reason, the RMS220 combines optimized temperature uniformity with a built-in nitrogen system, because nitrogen keeps oxygen away from the hot powder. Its RaiseTouch software adds real-time monitoring and parameter control. Together these features help maintain dimensional accuracy in tall builds.
“Manufacturers today are looking for solutions that not only deliver quality, but also scale with their production needs,” said Edward Feng, Global CEO of Raise3D.
With the taller Z axis, Feng said, customers can “produce more in every build, reduce costs, and push the boundaries of what’s possible with SLS.”
The rest of the machine stays the same. The RMS220 uses a 75 W infrared fiber laser and prints at up to 2.2 L/h at a 20% packing density. A removable Build Unit 220 holds the powder and the build, so one unit can cool outside the printer while the next job starts. On its product page, Raise3D lists the RMS220 with Build Unit 220 at $34,999, excluding shipping and taxes.

Next, owners need one extra step. The ideaMaker 5.6.0 release notes state that users must reset their RMS220 printer settings in the slicer after upgrading.
Source: Raise3D press release, Raise3D RMS220 product page









