Revopoint’s Black Friday sale runs November 9 to 30 on its official store, with up to 30% off new 3D scanners, up to 50% off certified refurbished units and up to 35% off software. Every new-scanner price is in one table below, along with a reader code worth an extra 5%.
Revopoint’s Black Friday sale, with our reader code on the banner. Image: Revopoint.
Revopoint’s Black Friday sale is live on the official store and covers nearly the whole range, from the RANGE 3 and INSPIRE 2 at the affordable end to the automated Metrohub inspection systems. Amazon joins on November 19. Black Friday stopped being a single Friday some years ago; this one runs for three weeks.
The 50% figure applies to certified refurbished scanners; new hardware is up to 30% off, a discount shared by six models, four of which we have reviewed hands-on. 3DPrinting.com readers get an extra 5% off at checkout with the code REVOB53DP, on top of the sale prices. It works on everything in the sale except refurbished units.
Revopoint Black Friday Sale 2026
Official store: November 9 to 30, 2026. Amazon: November 19 to 30. Reader code: REVOB53DP for an extra 5% off at checkout, excluding refurbished units.
Both buttons are affiliate links supplied by Revopoint, so we may earn a commission if you buy through them, at no extra cost to you. The reader code does not apply to refurbished units.
Black Friday prices on new scanners
Prices as shown on Revopoint’s US store sale page on November 9, 2026, in US dollars, for the base edition of each scanner. Refurbished units are listed in their own section below. Revopoint says its European stores offer the same discount percentages, in local currency, and that the reader code works there too. Sale prices are shown rounded to the dollar. The reader code comes off on top at checkout.
The RANGE 3 Pro, MetroY and MetroX prices were confirmed by Revopoint; the sale page lists them as options under their siblings. Linked product names are affiliate links to Revopoint’s store; we may earn a commission at no extra cost to you.
POP 4: 20% off
POP 4 in Revopoint’s Black Friday artwork. Image: Revopoint.
POP 4 is the newest scanner in Revopoint’s POP line. Revopoint says it combines three capture technologies, blue multi-line laser, near-infrared structured light and VCSEL structured light, across five scanning modes, and pitches it at 3D printing, product design, reverse engineering, animation and VR assets.
The claim we would most like to see tested is the one about dark and highly reflective surfaces, which Revopoint says POP 4 can capture. Those are the parts that usually send a scanner owner looking for a can of scanning spray. We have not had a POP 4 on the bench yet. In October it was 15% off; for Black Friday it drops from $839 to $671, or roughly $637 with the reader code.
MetroY Ultra: 25% off
MetroY Ultra in Revopoint’s Black Friday artwork. Image: Revopoint.
MetroY Ultra sits at the top of Revopoint’s MetroY line, aimed at quality inspection, reverse engineering and product development. Revopoint quotes a volumetric accuracy of up to 0.015 mm plus 0.04 mm per meter of part length, and capture at up to 90 FPS with an NVIDIA GPU. The CMM Edition adds a Revo Measure workflow that Revopoint says is PTB-certified, for GD&T analysis and other measurement work.
The 25% discount takes the Standard Edition from $1,899 to $1,424, about $1,353 with the reader code, five percentage points deeper than in October. We have not tested a MetroY Ultra ourselves; our sponsored case study follows three reverse engineering projects built around one.
The MIRACO Series
MIRACO Plus and MIRACO Pro in Revopoint’s Black Friday artwork. Image: Revopoint.
The MIRACO scanners do their own processing. Scanning, meshing and reviewing the model all happen on the device, which spares you from balancing a laptop on a workbench or carrying one around a client site. Revopoint positions the MIRACO and MIRACO Pro for everything from small detailed parts to full-body scans. The MIRACO Plus adds photogrammetry, and Revopoint says its photogrammetric metrology kit improves global accuracy on large objects by limiting the error that builds up as point clouds are stitched together.
We have reviewed both the MIRACO and the MIRACO Plus with its metrology kit. All three models are 15% off: MIRACO Plus goes from $2,199 to $1,869, and MIRACO from $1,499 to $1,274.
The RANGE 3 Series
RANGE 3 and RANGE 3 Pro in Revopoint’s Black Friday artwork. Image: Revopoint.
RANGE 3 is the newest hardware in the sale; pre-orders opened on October 22 and Revopoint says the series is now shipping. Revopoint built the series for large objects such as car parts, furniture, industrial equipment and full-body scans. It quotes a capture area of up to 687 x 672 mm per frame at a 1,000 mm working distance and a maximum scan volume of 4 x 4 x 4 m. Both models connect over Wi-Fi 6, and the RANGE 3 Pro adds an 11-line infrared laser mode for finer geometric detail.
We have not tested a RANGE 3 yet; our sponsored launch article has the full specifications. The series is 5% off, so anyone who missed the pre-order window can still buy one at a discount. That takes the RANGE 3 from $369 to $351, or about $333 with the reader code, and the RANGE 3 Pro from $459 to $436, or about $414.
The rest of the range
The deepest cut on new hardware, 30%, applies to six scanners: INSPIRE 2, MetroY Pro, MetroY, MetroX Pro, MetroX and Trackit. INSPIRE 2 is the cheapest of them at $384, and Trackit the most expensive at $3,486. For how they perform, see our hands-on reviews of the INSPIRE 2, MetroY Pro, MetroX and Trackit.
Elsewhere, POP 3 Plus is 15% off at $526, MINI 2 is 20% off at $663, and the wireless Trackit SR is 15% off at $3,144. At the top of the range, the Metrohub 09YU and 09TR, which Revopoint describes as automated robotic inspection systems, are 20% off at $6,240 and $7,840.
Certified refurbished: up to 50% off
The three refurbished models in the sale. Image: Revopoint.
Two refurbished scanners are half price, the RANGE 2 at $365 and the MINI at $399.50. The refurbished INSPIRE is 40% off at $239, the lowest price on any scanner in the sale. Revopoint says its refurbished units are certified, and it confirmed to us that every refurbished scanner in this sale comes with a two-year warranty, the same period it gives new scanners. The reader code does not apply to refurbished units, so these are the prices you pay.
Refurbished stock is limited by nature, so the selection may thin out well before November 30.
Software: up to 35% off
Software discounts in the Black Friday sale. Image: Revopoint.
Revopoint has also discounted the software that turns scan data into CAD models and inspection reports. According to Revopoint, Geomagic Control X and Design X, the inspection and reverse engineering suites it sells alongside its scanners, are 35% off. Revo Measure is 25% off, Revo Design Pro up to 30% off, and the one-year Revo Design license and Revo Design Personal up to 20% off. Monthly Revo Measure subscriptions are not included. The reader code also applies to software.
Revopoint’s store terms say Revo Measure, Revo Design and Geomagic licenses cannot be refunded once activated, so it is worth using the free trials Revopoint offers for Geomagic and Revo Design before you buy. We have not tested any of the software ourselves.
Five things to know before you check out
One code per order. Revopoint’s store terms allow a single discount code on top of sale prices, and REVOB53DP is that code. It is applied after the sale discount, so the reader prices in this article are our estimates; checkout shows the exact figure before shipping and tax.
Refurbished units are excluded. The reader code works on every new scanner and on software, but not on the refurbished RANGE 2, INSPIRE and MINI.
Amazon runs its own offers. From November 19 to 30, Revopoint says almost all its products will be discounted on Amazon, though the models and discount levels may differ from the official store. According to Revopoint, the reader code can also be used on Amazon orders. We have not checked Amazon’s prices.
Nearly everything is cheaper than in October. Against Revopoint’s Fall Sale, the discounts on POP 4, MINI 2, INSPIRE 2, MetroY Ultra and Trackit SR are deeper, and the reader code has grown from 2% to 5%. The exceptions are POP 3 Plus and MIRACO Plus, which were 20% off in October and are 15% off now. Even with the larger code they cost about $14 and $52 more than they did then.
Check the edition. Most scanners come in several editions and software bundles. The prices above are for the base edition the sale page shows first; bundles with Revo Design or Geomagic licenses cost more.
Black Friday dates and where to buy
The official store sale runs November 9 to 30, 2026, and the Amazon window November 19 to 30. If you are still weighing options at the professional end, our guide to the best professional 3D scanners puts several of these models in context alongside hardware from other manufacturers.
Shop the Revopoint Black Friday Sale
Add REVOB53DP at checkout for an extra 5% on top of the Black Friday prices, on everything except refurbished units. The store sale ends November 30, 2026; the Amazon window opens November 19.
Both buttons are affiliate links supplied by Revopoint, so we may earn a commission if you buy through them, at no extra cost to you. The reader code does not apply to refurbished units.
Revopoint paid for this article to appear on 3DPrinting.com. It was written and fact-checked independently by 3DPrinting.com. Hardware prices were checked against Revopoint’s US store sale page on November 9, 2026; the MetroY and MetroX prices, the RANGE 3 Pro price, the software percentages, the warranty, the European store terms and the code terms were confirmed by Revopoint in writing. We have not verified Amazon’s prices, and terms can change. Our linked reviews are independent hands-on tests; the linked case study and launch article are sponsored. Store links are affiliate links that may earn us a commission at no extra cost to you. Last reviewed: November 10, 2026.
